Septic help · Local septic pros

How to find your septic tank: five ways, in order

Start with the permit and as-built drawing from your county or state office, because it shows where the tank sits. Then follow the main sewer line out of the basement or crawl space and probe along it. If that fails, a septic professional can find the tank.

By Sean Mihelich, founder of Save My Well. Updated .

Bluestone Chemical, doing business as Save My Well, publishes this page as general information from the public sources it cites. It is not professional advice. Before you act, confirm with your local health or environmental department or a licensed septic professional.

First, check that you have a septic system

The Environmental Protection Agency says a home on a septic system shows a $0.00 charge for wastewater or sewer service on its utility bill, or gets no utility bill. It also says to check the property deed, building permit and design plans for your home.

Step 1: get the permit and as-built drawing

The Environmental Protection Agency says the local permitting authority, usually the local health or environmental department, can give you the septic record drawing, called the as-built design, and copies of the permits. NC State Extension says the permit and soil evaluation sheet show the approximate location of each part of the system and the size of the tank.

This Old House adds that the building department may hold county records with diagrams and permit applications, and that inspection paperwork may include a sketch. It says tank locations may be public record in some areas, and suggests asking long-time neighbors where the tank sits.

The records lookup on this site checks public permit data by address in the states it covers and shows which agency holds the paper file.

Step 2: follow the sewer line out of the house

This Old House says to find the main sewer line where it leaves the basement or crawl space, usually a pipe about 4 inches across, and follow it outside. The Environmental Protection Agency says that following the plumbing outlet may lead you to an access riser, a black or green disc, or a spot to probe for the top of the tank.

The two sources give different distances. Under the agency's description, the tank is usually about 10 feet from the building. This Old House says the tank sits at least 5 feet from the home, usually 10 to 25 feet away.

Step 3: probe the ground

This Old House says to call 811 first, so the utilities can mark their lines. It describes probing with a metal soil probe three or four feet long, or with rebar.

  • Start at least 5 feet from the house, along the likely path of the sewer line.
  • Push the probe down gently and feel for resistance. A tank lid is concrete or fiberglass, and the probe should not damage it.
  • With no resistance, move over about two feet and try again, working in a grid.
  • When you hit something solid, probe around it to learn its size, and mark the edges with flags.

Step 4: look for the lid or riser

This Old House says tank lids are usually round or rectangular and about two feet wide. Older tanks have concrete lids, and newer tanks have green or black plastic lids. This Old House says probing is not foolproof, because a tank may be too deep for a probe and rocky soil makes the search harder.

Do not pry a lid open. This Old House says to mark it so everyone at home avoids it, and NC State Extension says no one should ever enter a septic tank. NC State Extension also says a riser over the access port should be secured with a lock or a heavy lid so children cannot open it.

Step 5: ask a septic professional to locate it

The Environmental Protection Agency says your local permitting authority can give you a list of local septic professionals who can find the tank and drain field, and that a professional will walk the property to find each part.

This Old House says professionals use metal detectors and ground-penetrating radar, and puts a locate at $100 to $450 in a June 2026 update, with a more detailed inspection costing up to $700. Its cost data comes from Angi.

Once you find it

NC State Extension says to sketch the house, tank and drain field, and to record the distance from the house to the access port, so the tank is easy to find again. It says to install a riser if the tank is buried 6 inches or deeper. The Environmental Protection Agency says household tanks are typically pumped every three to five years.

Questions owners ask

Where do I get the septic permit and drawing for my address?
The Environmental Protection Agency says the local permitting authority, usually the local health or environmental department, can give you the as-built drawing and the permits.
How far from the house is a septic tank?
The agency says usually about 10 feet from the building. This Old House says at least 5 feet, and usually 10 to 25 feet.
How much does it cost to have a pro find the tank?
This Old House puts a locate at $100 to $450 in 2026, with a more detailed inspection up to $700.
Are septic tank locations public record?
This Old House says they may be in some areas, and to ask the local building department or health department.

Sources